Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.

RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the maneuvering lever, thus preventing any possible accidental deactivation. The technique defined as neutral crown will not permit interference with the original state of the permanent magnets, thus allowing to obtain maximum results in terms of safety and reliability. This technology also allows to mantain an exceptional concentration of magnetic energy exactly within the work field, thus ensuring a good hold on both a finished and unfinished parts.
ECONOMIC
The Tecnomagnete manual lifters are based on the technology of permanent magnets, therefore do not need electrical feeding. They are resistant to usage: the only movable component present is a rotor which is centered on ball bearings. This in turn develops neither physical contacts nor any friction during the rotation phase. Whithin normal working conditions they can be "maintenance free" over a long period of time.

MODEL

WEIGHT in Kg

LENGHT mm.

HEIGHT mm.

WIDTH mm.

TESTING LOAD Kg

WORKING LOAD Kg

ROUND LOAD Kg

MaxX 250

5 181 79 79 750 250 100

MaxX 500

15 242 101 106 1500 500 200

MaxX 1000

35 339 140 133 3000 1000 400

MaxX 1500

70 416 171 166 4500 1500 600

MaxX 2000

95 441 192 186 6000 2000 800

Contact Us
PDA Inc.
Don Dobesh
127 N. Covell
Sioux Falls, SD  57104
(605) 332-2630
Toll Free: 1-800-653-2630
Fax: (605) 332-7064
Email: don@pdainc-sd.com

Tecnomagnete