Highest Quality
Fairborn is dedicated to the efficient production of the highest quality
products. This commitment provides for product life expectancy far beyond any
competitive model and ensures our customers maximum value.
The pride in workmanship of our experienced personnel, combined with the
utilization of the finest grade raw materials, assures products of the highest
caliber.
We employ extensive tests at every stage of manufacture and subject the finished
product to strict environmental testing to assure each unit will out-perform
anything else on the market.
Technical Assistance
Fairborn's commitment to service is supported by a qualified nationwide
representative network, and our experienced sales, engineering and management
staff. This expertise ensures our success in providing Fairborn customers the
best tailor fit product for their specific needs.
Please call us at (800) 262-1188 for any additional information or for
assistance in designing a unit that will enhance a facility's aesthetic value,
while saving costly energy dollars.
SERIES 2000
Rigid Dock Shelter
The Series 2000 provides excellent weather protection for a wide range of truck
and building variations, while yielding unobstructed accessibility to the
interior of the vehicle.
Flexible "Scotchply™"
stays ensure that head and side curtain pressure is maintained on the truck body
while compressible neoprene cords conform to the vehicle's irregular perimeter,
guaranteeing a snug fit.
Translucent panels secured to the exterior of the structural frames protect the
dock area, while allowing natural light penetration. The head frame is sloped
from center to provide for adequate drainage. A shelter constructed of our
superior performance Dynalon fabric ensures maximum durability.
Series 2000 Alternate
Series 2050 - Similar to the 2000 except the unit projection is yieldable by the
means of a spring-loaded "X" frame in lieu of a rigid frame.
Suggested Specification:
Series 2000 Rigid Dock Shelter, as manufactured by Fairborn USA Inc., Upper
Sandusky, Ohio.
Side and head curtain fabric to be Dynalon, or other fabric as specified. Side
curtains to be reinforced with Dynalon multi-ply bottom panels, equipped with
highly visible guide stripes. Head curtain shall have Dyna-Armor pleats,
constructed of Dynalon, at each end and shall be stabilized by wind straps. Side
curtain edges shall encase a continuous closed cell neoprene cord. The top
section of the side curtain to include a full "Z" stay pattern. All
curtains shall encase 3M "Scotchply™"
stays (steel not acceptable) enclosed by multi-layer reinforcement sleeves.
Stays to be spaced evenly with a maximum of 14" O.C. in side curtains and a
20" maximum O.C. in head curtain.
Shelter shall consist of three rigid, pressure treated wood frames, kiln dried
before and after treating, having translucent fiberglass secured to the
exteriors. (Steel frames are optional.) The 2" x 6" head frame shall
be sloped from center to provide for adequate drainage. Exterior frame corners
shall be trimmed with aluminum angle. One pair of covered polyurethane foam
bottom pads of 8" to 2" wedge design to be furnished per shelter. All
hardware shall have a rust resistant coating. Unit shall include two factory
painted 6" structural steel channel guards.
Here's how a performance based specification would
be written:
FABRIC: Dock seal or shelter shall incorporate a Dynalon cover having the
characteristics listed below. All bidders must submit certified test results
with bid. The manufacturer shall state the characteristics of the fabric offered
and that all tests are done in accordance with Federal Standard 191 and the
specific method as listed below. Wear characteristics of any substitute material
shall meet or exceed performance specifications.
Summary of properties of fabrics per Federal Standard 191
Coated Fabric: Dynalon
Tear strength (Per Lbs., Method 5134): 300 x 300
*Abrasion Resistance (Cycles, Method 5306): 6000
Tensile Strength (Per Lbs., Method 5100): 1200 x 1200
Cold Resistance (At -40°F, Method 5874): Pass
Coated Fabric: Dynaflex
Tear strength (Per Lbs., Method 5134): 165 x 165
*Abrasion Resistance (Cycles, Method 5306): 1250
Tensile Strength (Per Lbs., Method 5100): 550 x 575
Cold Resistance (At -40°F, Method 5874): Pass
*H-22 Wheel, 1000 Gram Load, End Point-First Exposure to Base Fabric.
Highest Quality
Fairborn is dedicated to the efficient production
of the highest quality products. This commitment provides for product life
expectancy far beyond any competitive model and ensures our customers maximum
value.
The pride in workmanship of our experienced personnel, combined with the
utilization of the finest grade raw materials, assures products of the highest
caliber.
We employ extensive tests at every stage of manufacture and subject the finished
product to strict environmental testing to assure each unit will out-perform
anything else on the market.
Technical Assistance
Fairborn's commitment to service is supported by a
qualified nationwide representative network, and our experienced sales,
engineering and management staff. This expertise ensures our success in
providing Fairborn customers the best tailor fit product for their specific
needs.
Please call us at (800) 262-1188 for any additional information or for
assistance in designing a unit that will enhance a facility's aesthetic value,
while saving costly energy dollars.
SERIES 3000
Flexible Dock Shelter
The Series 3000 may be an alternate selection when space limitations or other
considerations preclude the use of a rigid dock shelter.
The shelter is normally in the extended position and uses spring tension to hold
the curtains tight to the truck body upon vehicle entry.
A split head curtain further adds to this unit's versatility in servicing a wide
range of vehicles. A combination of our superior performance materials
guarantees this unit will withstand the most demanding requirements.
Series 3000 Alternate
Series 3500 - Similar to the 3000 but having tapered side curtains and
bottom draft pads in lieu of 18" vertical foam blocks.
Suggested Specification:
Series 3000 Flexible Dock Shelter, as manufactured by
Fairborn USA Inc., Upper Sandusky, Ohio.
Cover fabric to be Dynaflex, or other fabric as specified. Frame members,
2" x 6" raked header and 2" x 12" sides to be pressure
treated wood, kiln dried before and after treating. (Steel frames are optional.)
Unit to include upper and lower spring bias tension arms of 3/4" I.D.
galvanized pipe which are designed to maintain the cover taut in the extended
position. The tension arms and the top cross bar, upon entry of vehicle, shall
have horizontal and vertical movement provided by the means of self-lubricating
steel trolleys rolling in steel formed tracks. Unit to include one pair of
covered polyurethane foam bottom pads 18" high. The bottom pad face shall
have touch and hold fasteners which mate with touch and hold on the inside lower
section of the front cover. Side curtains to be reinforced with Dynalon bottom
panels equipped with highly visible guide stripes.
Head curtain to be a one piece design with a 12" adjustable drop flap
equipped with touch and hold fasteners. Head curtain to include Dyna-Armor
pleats, constructed of Dynalon, at each end.
Here's how a performance based specification would
be written:
FABRIC: Dock seal or shelter shall incorporate a Dynalon cover having the
characteristics listed below. All bidders must submit certified test results
with bid. The manufacturer shall state the characteristics of the fabric offered
and that all tests are done in accordance with Federal Standard 191 and the
specific method as listed below. Wear characteristics of any substitute material
shall meet or exceed performance specifications.
Summary of properties of fabrics per Federal Standard 191
Coated Fabric: Dynalon
Tear strength (Per Lbs., Method 5134): 300 x 300
*Abrasion Resistance (Cycles, Method 5306): 6000
Tensile Strength (Per Lbs., Method 5100): 1200 x 1200
Cold Resistance (At -40°F, Method 5874): Pass
Coated Fabric: Dynaflex
Tear strength (Per Lbs., Method 5134): 165 x 165
*Abrasion Resistance (Cycles, Method 5306): 1250
Tensile Strength (Per Lbs., Method 5100): 550 x 575
Cold Resistance (At -40°F, Method 5874): Pass
*H-22 Wheel, 1000 Gram Load, End Point-First Exposure to Base Fabric
Highest Quality
Fairborn is dedicated to the efficient production
of the highest quality products. This commitment provides for product life
expectancy far beyond any competitive model and ensures our customers maximum
value.
The pride in workmanship of our experienced personnel, combined with the
utilization of the finest grade raw materials, assures products of the highest
caliber.
We employ extensive tests at every stage of manufacture and subject the finished
product to strict environmental testing to assure each unit will out-perform
anything else on the market.
Technical Assistance
Fairborn's commitment to service is supported by a
qualified nationwide representative network, and our experienced sales,
engineering and management staff. This expertise ensures our success in
providing Fairborn customers the best tailor fit product for their specific
needs.
Please call us at (800) 262-1188 for any additional information or for
assistance in designing a unit that will enhance a facility's aesthetic value,
while saving costly energy dollars.
SERIES 4000
Flexible Rail Shelter
The Series 4000 is a spring-loaded fabric rail enclosure available in a three or
four-sided configuration. It is designed to encapsulate the space between the
building opening and a rail car to ensure weatherproof protection to the dock
area.
Once the rail car is in position, spring tension extends the fabric enclosure,
maintaining pressure against the side of the vehicle. Our superior performance
Dynaflex fabric will greatly increase this unit's life expectancy.
Series 4000 Alternate
Series 4100 - 4 Sided Frame, 3 Sided Cover
Series 4200 - 4 Sided Frame, 4 Sided Cover
Suggested Specification:
Series 4000 Flexible Rail Shelter, as manufactured by
Fairborn USA Inc., Upper Sandusky, Ohio.
Cover fabric to be Dynaflex, or other fabric as specified. Frame members,
2" x 6" header and 2" x 8" sides to be pressure treated
wood, kiln dried before and after treating. (Steel frames are optional.) Unit to
include upper and lower spring bias tension arms of 1" I.D. galvanized
pipe, which are designed to extend the unit and maintain pressure against the
rail car. The tension arms and the top crossbar, upon release of the rope/pulley
system, shall have horizontal and vertical movement provided by the means of
self lubricated steel trolleys rolling in steel formed tracks. Unit to include
fabric tie backs equipped with touch and hold to maintain unit in the retracted
position.
The head curtain shall have two vertical splits, held together with touch and
hold, to allow for it to be attached to the interior of the rail car to form a
natural canopy. Adjustable rubber cords are provided as a means to make the
attachment of the head curtain to the rail car.
Here's how a performance based specification would
be written:
FABRIC: Dock seal or shelter shall incorporate a Dynalon cover having the
characteristics listed below. All bidders must submit certified test results
with bid. The manufacturer shall state the characteristics of the fabric offered
and that all tests are done in accordance with Federal Standard 191 and the
specific method as listed below. Wear characteristics of any substitute material
shall meet or exceed performance specifications.
Summary of properties of fabrics per Federal Standard 191
Coated Fabric: Dynalon
Tear strength (Per Lbs., Method 5134): 300 x 300
*Abrasion Resistance (Cycles, Method 5306): 6000
Tensile Strength (Per Lbs., Method 5100): 1200 x 1200
Cold Resistance (At -40°F, Method 5874): Pass
Coated Fabric: Dynaflex
Tear strength (Per Lbs., Method 5134): 165 x 165
*Abrasion Resistance (Cycles, Method 5306): 1250
Tensile Strength (Per Lbs., Method 5100): 550 x 575
Cold Resistance (At -40°F, Method 5874): Pass
*H-22 Wheel, 1000 Gram Load, End Point-First Exposure to Base Fabric
Contact Us
PDA Inc.
Don Dobesh
127 N. Covell
Sioux Falls, SD 57104
(605) 332-2630
Toll Free: 1-800-653-2630
Fax: (605) 332-7064
Email: don@pdainc-sd.com